Having access to a spanking bench opens up a whole new dimension of CP play. Unfortunately, wooden horses are usually bulky and hard to conceal, which can be a problem if friends or relatives pop in for a surprise visit.

What most CP players really need is a sturdy, lightweight bench that can be easily broken down for storage when spanking time is over. Like this little devil here.

The design is ridiculously simple. Just wrap some padding around a board and attach a pair of Rugged Buddy Folding Sawhorse Legs. These powder-coated steel legs lock firmly into place, are designed for heavy loads, and sell for about $35 a pair at Amazon.com. This particular bench was made with the 28" legs, but 34" legs are also available if your spankee is on the tall side.

	Step 1: Cut your board to length and then sand, stain and varnish as desired. I opted for a 4' length of 2x8, but you can make your bench as long or as wide as you like.
	Step 2: Get your materials together. For this project I used 3" foam and blue vinyl. When the nice lady at the fabric store asks what you're working on, just tell her you're reupholstering some old bar stools.
	Step 3: Position the board on the foam padding.
	Step 4: To make life easier, hold the foam down with your knee and temporarily tack it into place with upholstery tacks.
	Step 5: Position the board and padding on your covering material.
	Step 6: Now pull up the first tacks on each side in preparation for wrapping the covering material around the padding, and tucking the edges underneath.
	Step 7: Start wrapping the vinyl over the foam.
	Step 8: Tuck the edges of the vinyl underneath the foam on one side, and then nail the whole mess down with wide-headed nails. Then pull up the next tack and keep going down the line. I think this process works best if you complete one side first and then move on to the other.
	Step 9: An upholsterer I'm not, but the foam and vinyl are firmly nailed into place. They're not going anywhere.
	Here's what the board looks like with padding in place. Now the rest is easy.
	The Rugged Buddy Folding Sawhorse Legs. Mounting brackets, hardware and rubber feet are all included.
	Step 10: Mount the mounting brackets as per the manufacturer's instructions.
	Step 11: Mount the legs to the mounting brackets
	That's it. Now the next time you want to see your partner's backside high in the air, ready for a good strappin', just pull your folding bench out from underneath the bed and tell 'em to "Assume the position.